Switch Cisco CBS350-8MP-2X-EU

Liên hệ
  • Cổng mạng: 8 x 2.5G
  • Cổng uplink: 2 x 10G RJ45/SFP+ combo
  • Cấp nguồn qua Ethernet (PoE): PoE+ (240W)
  • Cung cấp PoE 60W trên 4 cổng
  • Chức năng chồng chập: Hỗ trợ chồng tối đa 4 thiết bị
  • Quạt: 1 quạt
  • Nguồn điện: Nguồn điện nội bộ

Mô tả

Cisco CBS350-8MP-2X-EU là thiết bị chuyển mạch được thiết kế với 8 cổng 2.5G Ethernet hỗ trợ PoE, bao gồm 4 cổng PoE+ cung cấp công suất tối đa 30W mỗi cổng và 4 cổng UPoE cung cấp công suất tối đa 60W mỗi cổng. Tổng công suất PoE của thiết bị lên đến 240W, mang lại khả năng cấp nguồn ổn định cho các hệ thống wifi, camera quan sát và thiết bị Internet of Things (IoT) mà không gặp phải vấn đề thiếu hụt công suất. Bên cạnh đó, Cisco CBS350-8MP-2X-EU đã được kiểm tra và đạt tiêu chuẩn hiệu suất nghiêm ngặt của Cisco, với tốc độ chuyển mạch lên đến 80Gbps, đảm bảo kết nối internet tốc độ cao cho các mô hình văn phòng doanh nghiệp, chi nhánh hệ thống, khách sạn, nhà hàng,…

Cisco CBS350-8MP-2X-EU có 8 cổng 2.5G Ethernet hỗ trợ PoE
Cisco CBS350-8MP-2X-EU có 8 cổng 2.5G Ethernet hỗ trợ PoE

Các tính năng tiết kiệm năng lượng tiên tiến, như hỗ trợ tiêu chuẩn Ethernet tiết kiệm năng lượng IEEE 802.3az, giúp giảm thiểu mức tiêu thụ năng lượng. Thiết bị tự động điều chỉnh trạng thái của liên kết, đưa liên kết vào trạng thái nghỉ khi không có lưu lượng truy cập và tự động ngắt nguồn trên các cổng khi liên kết bị ngắt. Thêm vào đó, thiết kế không quạt giúp giảm tiếng ồn và tiết kiệm điện năng, mang lại hiệu suất vận hành êm ái.

Dòng Cisco Business 350 Series trang bị giao diện quản trị qua web hoặc ứng dụng di động, giúp đơn giản hóa quá trình triển khai và quản lý mạng. Giao diện quản trị trực quan cho phép người dùng không có chuyên môn về CNTT cũng có thể cấu hình, quản lý và khắc phục sự cố chỉ trong vài phút. Trình hướng dẫn cấu hình dễ dàng và các công cụ hỗ trợ giúp bất kỳ ai cũng có thể thiết lập và quản lý hệ thống mạng một cách đơn giản.

Cisco CBS350-8MP-2X-EU cũng cung cấp các tính năng bảo mật nâng cao để bảo vệ dữ liệu doanh nghiệp và ngăn chặn các kết nối trái phép vào mạng. Thiết bị hỗ trợ các ứng dụng bảo mật mạnh mẽ như IEEE 802.1X và tính năng bảo mật cổng (port security), giúp kiểm soát quyền truy cập vào các phân đoạn mạng cụ thể. Xác thực dựa trên web mang lại một giao diện thống nhất, dễ sử dụng để xác thực các thiết bị và hệ điều hành mà không cần phải triển khai máy khách IEEE 802.1X trên mỗi điểm cuối.

Đặc điểm của Switch Cisco CBS350-8MP-2X-EU

  • Cổng mạng: 8 x 2.5G
  • Cổng uplink: 2 x 10G RJ45/SFP+ combo
  • Cấp nguồn qua Ethernet (PoE): PoE+ (240W)
  • Cung cấp PoE 60W trên 4 cổng
  • Chức năng chồng chập: Hỗ trợ chồng tối đa 4 thiết bị
  • Quạt: 1 quạt
  • Nguồn điện: Nguồn điện nội bộ
  • Tính năng: Chuyển mạch Layer 2, hỗ trợ VLAN, Spanning Tree Protocol (STP), bảo vệ chống mối đe dọa nâng cao, bảo mật IPv6 first-hop, chất lượng dịch vụ (QoS), sFlow, định tuyến động
  • Quản lý mạng: Cisco Business Dashboard và ứng dụng di động; giao diện quản lý trên thiết bị, CLI và SNMP

Thông số kỹ thuật của Switch Cisco CBS350-8MP-2X-EU

Performance
Capacity in Millions of Packets per Second (64-byte packets) 29.76 Mpps
Switching Capacity in Gigabits per Second 80 Gbps
Layer 2 Switching

Spanning Tree Protocol
Port grouping/link aggregation
- Up to 8 groups
- Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation​VLAN
-Support for up to 4,094 VLANs simultaneously
-Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN
-Management VLAN
-Private VLAN with promiscuous, isolated, and community port
-Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
-Guest VLAN, unauthenticated VLAN
-Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
-CPE VLAN
Voice VLAN
Multicast TV VLAN
VLAN Translation
Q-in-Q
Selective Q-in-Q
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP)
Unidirectional Link Detection (UDLD)
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping
IGMP Querier
Head-of-Line (HOL) blocking
Loopback DetectioN

Layer 3

IPv4 routing
-Wirespeed routing of IPv4 packets
-Up to 990 static routes and up to 128 IP interfaces
IPv6 routing
Layer 3 Interface
-Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR)
Policy-Based Routing (PBR)
DHCP Server
DHCP relay at Layer 3
User Datagram Protocol (UDP) relay

Stacking
Hardware stack Up to 4 units in a stack. Up to 192 ports managed as a single system with hardware failover
High availability Fast stack failover delivers minimal traffic loss. Support link aggregation across multiple units in a stack
Plug-and-play stacking configuration/management

Master/backup for resilient stack control
Autonumbering
Hot swap of units in stack
Ring and chain stacking options, auto stacking port speed, flexible stacking port options

High-speed stack interconnects Cost-effective high-speed 10G fiber interfaces.
Security

Secure Shell (SSH) Protocol
Secure Sockets Layer (SSL)
IEEE 802.1X (Authenticator role)
Web-based authentication
STP Bridge Protocol Data Unit (BPDU) Guard
STP Root Guard
STP loopback guard
DHCP snooping
IP Source Guard (IPSG)
Dynamic ARP Inspection (DAI)
IP/MAC/Port Binding (IPMB)
Secure Core Technology (SCT)
Secure Sensitive Data (SSD)
Trustworthy systems
Private VLAN
Layer 2 isolation Private VLAN Edge (PVE) with community VLAN
Port security
RADIUS/TACACS+
RADIUS accounting
Storm control
DoS prevention
Multiple user privilege levels in CLI
ACLs Support for up to 1,024 rules

Management

Web user interface
SNMP
Remote Monitoring (RMON)
IPv4 and IPv6 dual stack
Firmware upgrade
Port mirroring
VLAN mirroring
DHCP (options 12, 66, 67, 82, 129, and 150)
Secure Copy (SCP)
Autoconfiguration with Secure Copy (SCP) file download
Text-editable config files
Smartports
Auto Smartports
Textview CLI
Cloud services
Embedded Probe for Cisco Business Dashboard
Cisco Network Plug and Play (PnP) agent
Localization
Login banner
Other management

Power over Ethernet (PoE)
Power Dedicated to PoE 240W
Number of Ports That Support PoE 4 port PoE+ (30W) + 4 ports UPoE (60W)
Power consumption
System Power Consumption 110V=48.4W
220V=50.5W
Power Consumption (with PoE) 110V=312.4W
220V=307.3W
Heat Dissipation (BTU/hr) 1,065.9
Hardware
Total System Ports 8 x 2.5 Gigabit Ethernet  + 2 x 10G copper/SFP+ combo
RJ-45 Ports 8 x 2.5 Gigabit Ethernet
Combo Ports(RJ 45 + Small form-factor pluggable [SFP]) 2 x 10G copper/SFP+ combo
Console port Cisco Standard mini USB Type-B / RJ45 console port
USB slot USB Type-A slot on the front panel of the switch for easy file and image management
Buttons Reset button
Cabling type Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T
LEDs System, Link/Act, PoE, Speed
Flash 256 MB
CPU 800 MHz ARM
Packet buffer 1.5 MB
Environmental
Unit dimensions (W x H x D) 344 x 252 x 44 mm (13.6 x 9.94 x 1.73 in)
Unit weight 2.74 kg (6.04 lb)
Power 100-240V 50-60 Hz, internal, universal
Certification 23° to 122°F (-5° to 50°C)
Storage temperature -13° to 158°F (-25° to 70°C)
Operating humidity 10% to 90%, relative, noncondensing
Storage humidity 10% to 90%, relative, noncondensing
Acoustic noise and Mean Time Between Failure (MTBF)
FAN  1
Acoustic Noise 25°C: 41.3 dB
MTBF at 25°C (hours) 1,237,940