Mã sản phẩm |
FAP-433F |
Hardware |
Hardware Type |
Indoor AP |
Number of Radios |
3 + 1 BLE |
Number of Antennas |
5 External (RP-SMA) + 1 BLE Internal |
Antenna Type and Peak Gain |
Omni directional rubber duck antenna: 4 dBi for 2.4 GHz, 6 dBi for 5 GHz |
Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities |
- Frequency band: 2.4GHz
- Channel width: 4x4 20/40MHz
- Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 |
Radio 2 Capabilities |
- Frequency band: 5.0GHz
- Channel width: 4x4 20/40/80MHz and 2x2 160MHz contiguous
- Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 |
Radio 3 Capabilities |
Frequency band: 1x1 2.4/5.0 Bands, scan only |
Maximum Data Rate |
- Radio 1: up to 1147 Mbps
- Radio 2: up to 2402 Mbps
- Radio 3: Scanonly |
Bluetooth Low Energy Radio |
Bluetooth scanning and iBeacon advertisement @ 6 dBm max TX power |
Interfaces |
- 1x 10/100/1000/2500 Base-T RJ45
- 1x 10/100/1000 Base-T RJ45
- 1x Type A USB, 1x RS-232 RJ45 Serial Port |
Power over Ethernet (PoE) |
- 1 port powered by 802.3af
- No USB support, Operate in 2x2 mode with reduced power R1/R2 17dBm(Tx power) or Single 802.3af PoE: 2x2, max TX power 17dBm, no USB |
Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled) |
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/ EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist |
Maximum Tx Powerr (Conducted) |
- Radio 1: 2.4GHz: 24 dBm / 251 mW (4 chains combined)
- Radio 2: 5GHz: 23 dBm / 200 mW (4 chains combined)
- Radio 3: NA |
IEEE Standards |
802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz |
SSID Types Supported |
Local-Bridge, Mesh, & Tunnel |
Per Radio Client Capacity |
512 per Radio 1 and Radio 2 |
Cellular Co-existence |
✔ |
Reset Button |
✔ |
LED Off Mode |
✔ |
Advanced 802.11 Features |
OFDMA |
✔ (UL and DL) |
2.4 GHz OFDMA |
✔ |
Spatial Reuse (BSS Coloring) |
✔ |
HE-MU-MIMO |
✔ |
UL MU-MIMO 802.11ax mode |
✔ |
DL-MU-MIMO |
✔ |
Enhanced Target Wake Time (TWT) |
✔ |
ZeroWait DFS/Agile DFS |
✖ |
Wireless Monitoring Capabilities |
Rogue Scan Radio Modes |
Background, Dedicated |
WIPS / WIDS Radio Modes |
Background, Dedicated (recommended) |
Packet Sniffer Mode |
✔ |
Spectrum Analyzer |
✔ |
Dimensions |
Length x Width x Height |
8.27 x 8.27 x 2.22 inches (210 x 210 x 56.5 mm) |
Weight |
2.19 lbs (0.995 kg |
Mounting Options |
Ceiling, T-Rail, and Wall |
Included Accessories |
Mount kit for Ceiling, T-Rail and Wall. 5 RP-SMA Male dual-band dipole antenna |
Environment |
Power Supply |
SP-FAP400-PA-XX or GPI-130 |
Power Consumption (Maximum) |
24.5 W |
Humidity |
5–90% non-condensing |
Operating / Storage Temperature |
32–113°F (0–45°C) / -31–-94°F (-35–70°C) |
Directives |
Low Voltage Directive • RoHS |
UL2043 Plenum Material |
✖ |
Mean Time Between Failures |
>10 Years |
IP Rating |
N/A |
Surge Protection Built In |
✔ |
Hit-less PoE Failover |
✔ |
Certifications |
WiFi Alliance Certified |
No |
DFS |
FCC, IC, CE, Japan |